Product Details:
Lighting Color | Red |
Brand | FIRELITE |
Ac Power | 230 Volt AC |
Color | RED |
Material | MS |
Type | Fire Alarm |
Weight | 14 Kg |
Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact,
cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features. The
combination of Fire•Lite’s newer series devices and legacy
300 Series devices, along with the MS-9600LS(E) or
MS-9600UDLSE FACP, offer the latest in fire protection technology. LiteSpeed™ is a patented technology that polls 10
devices at a time looking for new or different information.
When new information is found at a specific address, the system polls that device several times for any new data. This
improvement allows a fully loaded panel with up to 636
devices to report an incident and activate the notification circuits in under 10 seconds. With this new polling scheme,
devices can be wired on standard twisted, unshielded wire up
to a distance of 10,000 feet per loop. Each Signaling Line Circuit (SLC) loop supports up to 159 addressable detectors
including photoelectric, photoelectric with heat, beam, ionization, photoelectric duct, fixed heat, fixed heat with rate-of-rise,
and fixed high-heat detectors. It also supports up to 159
addressable modules including monitor (two-wire detector,
normally open devices), dual-monitor functions (two monitor
circuits from one module, two addresses used), multimonitor
(multiple monitor circuits from one module, multiple addresses
used), control (for Notification Appliance Circuits), and relay
(two Form-C) modules.
The FLPS-7 power supply is a separate board while all other
electronics are contained on a single main circuit board. Both
boards are mounted to a quick-removable chassis and housed
in a metal cabinet. The backbox can be installed allowing field
wiring to be pulled. When construction is completed, the chassis with the electronics can be quickly installed with two bolts.
The MS-9600UDLS(E) includes a factory-installed DACT-UD2
Digital Alarm Communicator Transmitter. The DACT transmits
system status (alarm, troubles, AC loss, etc.) to a Central Station via internet (optional IPDACT installed) or the public
switched telephone network.
Optional modules, which plug into the main circuit board, are
available for special functions. Available accessories include
LED, graphic and LCD annunciators, reverse polarity/city box
transmitter, digital alarm communicator/transmitter, SLC
expansion module, local and remote upload/download software and remote power expansion.
FM APPROVED to UL ANSI 864
Additional Information:
- Item Code: MS9600LS
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: COIMBATORE
- Production Capacity: 100
- Delivery Time: One week
- Packaging Details: Wooden Packing