Sri Vari Technologies

Features:

Alarm status is indicated By Red colour LED.
Operates on 24 VDC.
Red, Green, Yellow colour Plastic MCP’s. 
Yellow and Green for Gas Abort & Release purpose. 
1 No’s of CO & NC Output. 

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Features:

 
Alarm status is indicated By Red colour LED.
Operates on 24 VDC. 
Red, Green, Yellow colour Plastic MCP’s.
Yellow and Green for Gas Abort & Release purpose. 
1 No’s of CO & NC Output.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Product 

RE-716M series are conventional call points to bypass gas release by pressing the front glass. 

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

Connecting to the loop of GST fire alarm system, DI-9204E Digital Manual Call Point (MCP) is suitable for public places. When there is a fire, pressing the frangible element on this MCP can send fire signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

Unique ‘Plug & Play’ installation concept
• Total ‘Flex-Ability’ in the choice of operating element
• Anti-Tamper facility
• Enhanced aesthetics
• Fully approved to the latest standards
• Backward compatibility

Additional Information:

• Item Code: LEDModel
• Delivery Time: One Week
• Packaging Details: Carton Boxes

FEATURES

• Display: 16 X 4 Char LCD Screen.
• Control Keys: Silence Buzzer, Silence/Resound Alarm, Reset, Evaluate, Accept delay. Indicators: Fault, NAC
• Fault, Earth Fault, Fire, Power, System Fault.
• 16 X 4 LCD display, aesthetically designed front facia
• Up to 1,000 m. Typical 20 detector per Class B Circuit + 5 MCPs
• Individual Class B Circuit Isolation
• Pin point address location of sensors with customizable text inserts
• Programmable input for remote reset/evacuate/alert/fire
• Lamp Test Facility
• Detectors/MCPs in same circuit
• Date/Time/Password configuration
• Separate configuration/user memories/system fault, sound/ resound feature like EN 54-4 standard
• Fire, Fault, Configurable Relay
• Circuit wise NAC configuration
• NAC Enable/Disable facility
• Monitored NAC and Class B Circuit for Open/Short/Faults
• PC tool for advanced configuration needs/Event exploring
• One Man walk test facility
• Certified for Safety standard IEC 62368-1:2018
• Staged Delay configuration for alarm verification
• Engineering Mute Configuration
• Battery Charging/Battery Internal Resistance Monitoring
• On board memory lock switch to prevent unauthorized panel configuration changes.
• Configurable delays to output, with timer to fire indication
• Latching/Non-Latching configuration for fault for easy debugging

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton box

Product :

RE-102 is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed to be used for small size commercial buildings and small scale industries. RE-102 model is an user friendly 2 zone standalone control panel, with optional zone wise Sounder/Contact respectively. 

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Product 

RE-104 is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed for small size commercial buildings and small scale industries. RE-104 model is an user friendly 4 zone standalone control panel, with optional zone wise Sounder/Contact respectively. 

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

RE25AR Gas Release Panel fully complies with UL -864 and NFPA-72. It is a feature-packed control unit performing dual function of detection and controlled release of gaseous agent..

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

Product 

RE-25SS sounder cum strobe are designed to simplify installations to provide primary and secondary for fire and security applications. These are ideal where smaller notifications devices is desired. The horns can be flush / ceiling mounted with / without back box. Strobe shall be wired as primary (or) secondary signaling notification appliance flashing at 1Hz over entire voltage operating range. Strobe light consists of Xenon flash tube. 

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

Product 

  The Conventional RE-326 detectors are designed by a competent fire alarm sensors designer in accordance with the requirements of EN – 54 and any other local codes of practice that are applicable. It will compatible all conventional Fire Alarm Panels. There are range of 2/4 wire detectors in this series like Ionisation and Heat with Remote LED. O The innovative thermistor sensing circuit is provided in RE 326-2HLdetector to give 57 C thermal detection in a low profile package and Also in the 4 wire detectors with 12V / 24V operating voltage. RE 326-2SL photoelectric detectors have unique optical sensing chamber to sense smoke produced by a wide range of combustion sources. The model RE-326-412S is the 4wire 12V Operating smoke detector

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Product Overview

RE-9012 is a Microprocessor based conventional Fire Alarm Control Panel, are designed to be used for medium and large size commercial complexes and industrial establishments. These panels are user friendly system such as touch keypad to program panel. This can be used as a standalone or networkable.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

Product Overview

RE-900 Series, Microprocessor based conventional Fire Alarm Control Panel, are designed to be used for medium and large size commercial complexes and industrial establishments. The panels comes in a range starts with 12 Zone upto 128 Zones. These panels are user friendly system such as touch keypad to program panel. This can be used as a standalone or networkable

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

DC-9102E Conventional Photoelectric Smoke Detector is a new-generation product. With built-in microprocessor, the detector is highly fixed with reliable fire judging program, which make it stable and reliable performance. When the detector checks fire signal, it will send fire information to the control panel or addressable zone monitor unit by means of current changing. The detector keeps turning on the LED to indicate alarm state until it is reset. The detector is developed from sensing chamber by scattering theory. It has the ability to resist dust contamination and environmental light. The detector utilizes drift compensation algorithm: When the environment is changing, such as dust accumulation, humidity and temperature changing, the detector can figure out these drift variation to make up for sensitivity, thus the amount of smoke needed to generate an alarm remains constant, irrespective of environmental conditions.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector is a new generation product of GST. With built-in microprocessor, it works stably by being fixed with highly reliable fire judging program. On detecting a fire signal, it can change its own current to transmit the signal to fire alarm control panel (FACP) or addressable zone monitor unit. The detector keeps illuminating fire LED until it is reset by power-down.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

DI-9101E Intelligent Combination Heat Photoelectric Smoke Detector integrates photoelectric detection and fixed temperature and rate of rise detection technology by combining smoke sensor and semi-conductor heat sensor in mechanism and circuitry structure. Just because of the combination of smoke detection and heat detection, it not only overcomes the disadvantage that detectors using common infrared scattering technology are insensitive to black smoke with small particles, but also can pick up fire with obvious rise of temperature such as alcohol flame, thus extending its application range.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

DI-9102E Intelligent Photoelectric Smoke Detector is a new generation product, connected with intelligent fire alarm control panel to form fire alarm system. The detector turns on fire LED to indicate fire alarm condition and transmits the fire signal to the control panel. The detector is developed from sensing chamber by scattering theory. Besides stable performance and easy maintenance, the detector has the ability to endure dust contamination and environmental light. The detector utilizes drift compensation algorithm: When the environment is changing, such as dust accumulation, humidity and temperature changing, the detector can figure out these drift variation to make up for sensitivity, thus the amount of smoke needed to generate an alarm remains constant, irrespective of environmental conditions.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

DI-9103E Intelligent Rate of Rise and Fixed Temperature Heat Detector is a new addressable fire alarm device cooperating with GST intelligent fire alarm control panels(FACP) to build a fire detection system. The detector shows fire alarm by the LED indicator and transmits the signal to the FACP.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

Product

The RE-2554/8 is a 4/8 zone UL Listed Conventional Fire Alarm control Panel . These control panels are designed to be used in small & medium commercial industries, buildings, hotels, schools, etc. and are compatible with conventional detectors, manual call points and normally open dry contact devices. 

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

GST200N Intelligent Fire Alarm Control Panels are designed in comply with EN54-2 and EN54-4 standard (LPCB certificate No.: 548p) with qualities of simple installation, operation, and easy maintenance. 1-2 loop addressable panel is suitable for small buildings like office, restaurant, store, shop, etc

Additional Information:

• Delivery Time: 2 OR 3
• Packaging Details: Carton Box

Fire Projects has supply, install and test and commission GST 200-2 single loop and two loop addressable fire detection control panel with up to 242 devices per loop, the system is packed with features that are not usually associated with smaller and medium systems. The GST 200-2 provides a high quality solution at exceptional value. By utilizing advanced GST Protocol, the system is compatible with the complete range of GST intelligent Detectors, Sounders, Call Points, Interfaces, including gas extinguishing controls. Networkable with all GST intelligent fire control panels the system can be expanded up to a maximum of 240 GST panels (over 48,000 devices). The GST 200-2 is manufactured and certified to EN54 parts 2 and 4 and to BS5839 Part 4. By utilizing the GSTDef2.1 programming facilities enables advanced and complex cause and effects to be programmed with ease, including phased and cascade evacuation scenarios. The GST zone indication and control facility allows the operator to manually intervene, with evacuation and control of each zone, including control of all plant equipment under an alarm condition. Maintenance report of dirty detector, pre-alarm signal and are built in as standard, making the system ideal for many applications such as banks, shops, telecommunication centres and GSM exchanges, industrial and commercial facilities. Fire Projects has successfully commission and does programming of GST 200-2 intelligent 2 loop addressable fire alarm control panel as per customer needs.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Main Features

• 8 Zone conventional fire telephone center
• 2-way voice communication
• Networkable up to 8 Fire Telephone panels
• Call divert to the network panels
• Operator can select single or group call
• Operator can ring outstations and fixed handsets
• Call panel to panel
• Up to 10 communication points can be connected to each zone using socket jack
• Network cable monitored
• Communication line monitored

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: Carton Box

I-9105R Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios The detector is ideally suited to historical buildings, warehouses, large storages, shopping malls, leisure centres, exhibition halls, hotel lobbies, printing houses, clothing factories, museums and prisons, as well as places where slight smoke particles or corrosive gas exist. 

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: Carton Box

I-9301 Addressable Single I/O Module works in two-wire mode and four-wire mode.

In four-wire mode, on receiving start command from the fire alarm control panel (FACP), it will close the output relay to output 24VDC and illuminate the Active indicator. If there is short, open circuit, or power down, the module can check failure and report it to the FACP.

In two-wire mode, on receiving start command from the fire alarm control panel (FACP), it will close the output relay to output normally-open close contact signal and illuminate the Active indicator

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

I-9403 Intelligent Sounder Strobe is an audible and visual alarm device installed in field, which can be activated by fire alarm control panel in fire control center. After activated, it will generate strong audible and visual alarm signal to warn people in field. A 25.5mm high shallow base and a 40mm high deep base are available. The sounder strobe comes with the shallow base. The deep base C-94DB should be ordered separately. Unless otherwise stated, all descriptions in this manual take the shallow base as example.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

I-9404 Intelligent Sounder is an audible alarm device installed in field, which can be activated by fire alarm control panel in fire control center. After activated, it will generate strong audible alarm signal to warn people in field. A 25.5mm high shallow base and a 40mm high deep base are available. The sounder comes with the shallow base. The deep base C-94DB should be ordered separately. Unless otherwise stated, all descriptions in this manual take the shallow base as example. 

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

S-9102 Smoke Alarm is designed for  domestic usage such as a house, villa and apartment, etc. Built with high-quality
components and advanced technology, the alarm has an excellently stable performance and low power consumption. A 9V battery will operate up to one year. It can be easily installed, no commission required. Utilize internal buzzer to provide a loud local alarm. By using the output terminal, the alarm can be linked to other alarms in a common alarm network (up to 30 alarms) or can be interfaced to other systems.

Additional Information:

• Delivery Time: 2 or 3 Days
• Packaging Details: Carton Box

Product

Sounders are designed to simplify installations to provide primary and secondary for fire and security applications. These are ideal where smaller notifications devices are desired. These sounders can be flush / ceiling mounted with / without back box

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

The Innovair Flex D4120 4-wire photoelectric duct smoke
detector features a pivoting housing that fts both square and
rectangular footprints and mounts to round or rectangular ductwork.
This unit senses smoke in the most challenging conditions, operating in air ow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low- ow feature for simple maintenance.
The Innovair Flex housing provides ample wiring space, a ¾-inch
conduit knockout, and built-in short circuit protection to prevent
damage to sensitive components during installation. High contrast terminal designations make wiring easy. With its 2:1 sensor-to-power capability, the power board of the D4120 may be used to monitor a second sensor, D4S, simultaneously (i.e., supply and return side).
As many as 50 Innovair Flex detectors can be interconnected. When one unit senses smoke, all interconnected detectors will switch their relays; only the detector sensing smoke will go into alarm, thus pinpointing the fre source.

Additional Information:

• Item Code: D4120
• Delivery Time: One Week
• Packaging Details: Carton Boxes

System Sensor Model BEAM1224 is a four-wire conventional
reflected beam smoke detector, which is uniquely suited for
protecting open areas with high ceilings, where other methods of
smoke detection are diffcult to install and maintain. It is to be used with UL Listed compatible control panels only. An advantage of this single-ended reflective design is that it is much easier to install than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a two-digit signal strength meter incorporated into the product. Another advantage of the BEAM1224 is that it is listed for operation in temperatures ranging from –22°F to 131°F. This means it can be used in open areas to provide early warning in environments where temperature extremes may exceed the capability of other types of smoke detectors.
BEAM1224 consists of a transmitter/receiver unit and a reflector.
When smoke enters the area between the unit and the reflector,
the smoke causes a reduction in the signal. When the smoke level reaches the predetermined threshold, an alarm is activated.

This is a battery operated smoke detector which can also be used in a fire fighting or security protection system as an independent photoelectric smoke detecting alarm.
When the smoke concentration on the site reaches the alarm threshold or the test button is pressed and held down, the LED of the alarm will turn from slow flashing to quick flashing and will give out sound alarm signals.
When the smoke concentration drops below the alarm threshold or the test button is released, the alarm will recover to its normal state (the Alarm state is not locked, the LED will restore to slow flashing and the alarm will stop)

Additional Information:

• Item Code: JTYJGD2330B
• Delivery Time: One Week
• Packaging Details: Carton Box

The 2351E detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm.
This benefts the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation.
‘Drift compensation’ algorithms are one of the key features of the 2351E detector. These algorithms ensure a consistent alarm sensitivity threshold for pe riods between service intervals. This provides the user with both a reduction in the frequency of nuisance alarms and maintenance savings by extending the period before cleaning of the detector chamber is required.
The sensitivity of a smoke detector is critical to its overall performance, this is reflected in both its ability to detect real fre conditions and its resilience to non-fire stimuli. The 2351E’s performance can be optimised for it’s application by selecting from one of three preset alarm thresholds - Low, Medium and High, offering greater stability and optimum performance within the environment in which it has been installed.

Additional Information:

• Item Code: 2351E
• Delivery Time: ONE WEEK
• Packaging Details: CARTON BOXES

Low profle design
• Low current draw
• Backward compatible with Series 100 detector range of bases
• Wide operating voltage 8 to 30VDC
• Bi-colour LED detector status indicator
• Automatic drift compensation
• Programmable sensitivity
• Addressable feature
• Advanced maintenance features via remote hand-held test unit
• Range of detector bases available
• Tested and approved to EN54 – 5:2000 Class BS (Amendment 1)
• Extended warranty

Additional Information:

• Item Code: 4351E
• Delivery Time: One week
• Packaging Details: Carton Boxes

Mini-horns operate at 12 and 24 volts and are ideal for hotel, motel or residential fre system applications, where a smaller notification device is desired. The mini-horns offer high and
low volume settings, and temporal or non-temporal tones. The horns can be mounted to single gang back boxes for aesthetically sensitive applications.

Additional Information:

• Item Code: SOUNDERS
• Delivery Time: ONE WEEK
• Packaging Details: CARTON BOXES

RE-2558 is an UL Listed Microprocessor based conventional Fire
Alarm Control Panel which has 8 Zones . These control panels are
designed to be used in small and medium sized commercial
complexes, buildings, hotels, schools, and industrial establishments.
They are compatible with conventional detectors, manual call points and normally open dry contact devices.

Series 65A Photo-Electric Smoke Detector The Series 65A Photo-Electric Smoke Detector incorporates a pulsing LED located within the housing of the detector. The detector housing is identical to that of the Ionization Detector but has an indicator LED which is clear in quiescent state but produces red light in alarm.

Additional Information:

• Item Code: ApolloXP65
• Delivery Time: One week
• Packaging Details: Carton Boxes

Series 65A Heat Detector
The Series 65A Heat Detector monitors
temperature by using a dual thermistor network
which provides a voltage output proportional to
the external air temperature. There are nine heat
detectors in the Series 65A range designed to
suit a wide variety of operating conditions.
• Can be used for applications where smoke
detectors are unsuitable
• Ideal environments that are dirty or smoky under
normal conditions
• Wide operating voltage
• Flashing LED option
• Flashing LED and magnet operated test switch option

Additional Information:

• Item Code: Series65A
• Delivery Time: One week
• Packaging Details: Carton Boxes

Scope of work:

1. Control panel operational.

     a. All LED, lights and displays on the control panel are operational.

     b. All detectors appear operational

     c. All manual call points appear operational.

     d. All speakers and hooters appear operational.

     e. Ensure the built-in battery charger is functional and the battery is properly charged

2). Operate at least one detector and manual call point and check the functions of control panel, response    

     indicators and notification devices (hooters)·Check the following;

A Microprocessor based conventional Fire Alarm Control Panel are designed to be used for medium & Large establishments like Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability. This panel can accommodate a range of 12 IDC’s upto 128 IDC’s. User friendly systems which involves a touch keypad to program the panel. This can be used as a standalone or peer to peernetwork.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: Carton Box

 RE-RI is a Alarm Response Indicator to duplicate detector Alarm latching LED’s if the detectors are placed above the false ceiling / inside closed rooms.

Additional Information:

• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOX

Product DescriptionWith The Assistance Of Team Of Vendors, We Are Engaged In Providing An Assorted Range Of Single Headed Hydrant Valve. Under The Supervision Of Adept Professionals, The Offered Valve Is Engineered Make Use Of Premium Grade Raw Material And Progressive Technology At Our Trustworthy Vendors' End. This Valve Is Broadly In Demand By Our Patrons And Used In Residential And Commercial Places.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: carton box

Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at
15 and 15/75 candela
• Field-selectable candela settings on wall units: 15, 15/75,
30, 75, 95, 110, 115, 135, 150, 177, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and three volume selections
• Universal mounting plate for wall units
• Mounting plate shorting spring checks wiring continuity before
device installation
• Electrically Compatible with legacy SpectrAlert devices
• Compatible with MDL3 sync module
• Listed for ceiling or wall mounting

Additional Information:

• Delivery Time: One week
• Packaging Details: Carton Boxes