Sri Vari Technologies

LH1-EC15-IN 15W Horn ABS Elliptical

•  Excellent speech reproduction 
• Water-and dust protected to IP 65 
• Easy to install 
• Simple power tapping through color code

I-9102 Intelligent Photoelectric Smoke Detector is an
addressable fire alarm device cooperating with GST intelligent fire alarm control panels to build a fire detection system.
It shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected. The detector receives very
weak infrared light under normal smokeless condition.
If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will alarm out.
In order to reduce interference and power consumption,the emitting circuit works in pulse mode to prolong the life of IR LED.

MOF720001301 ZX2Se Control Panel 1 to 2 Loop 230 Vac 2 Sounder Circuits networking capability

The ZXSe range of analogue addressable fi re alarm control panels have been designed and constructed around proven and reliable microprocessor technology. This simple approach has produced a modular, scalable fi re alarm platform suitable for protecting all types of premises.
Supporting a total of fi ve industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor, allows fi re detection devices to be independently selected based on performance or aesthetic appeal.

Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact,
cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features. The
combination of Fire•Lite’s newer series devices and legacy
300 Series devices, along with the MS-9600LS(E) or
MS-9600UDLSE FACP, offer the latest in fire protection technology. LiteSpeed™ is a patented technology that polls 10
devices at a time looking for new or different information.
When new information is found at a specific address, the system polls that device several times for any new data. This
improvement allows a fully loaded panel with up to 636
devices to report an incident and activate the notification circuits in under 10 seconds. With this new polling scheme,
devices can be wired on standard twisted, unshielded wire up
to a distance of 10,000 feet per loop. Each Signaling Line Circuit (SLC) loop supports up to 159 addressable detectors
including photoelectric, photoelectric with heat, beam, ionization, photoelectric duct, fixed heat, fixed heat with rate-of-rise,
and fixed high-heat detectors. It also supports up to 159
addressable modules including monitor (two-wire detector,
normally open devices), dual-monitor functions (two monitor
circuits from one module, two addresses used), multimonitor
(multiple monitor circuits from one module, multiple addresses
used), control (for Notification Appliance Circuits), and relay
(two Form-C) modules.
The FLPS-7 power supply is a separate board while all other
electronics are contained on a single main circuit board. Both
boards are mounted to a quick-removable chassis and housed
in a metal cabinet. The backbox can be installed allowing field
wiring to be pulled. When construction is completed, the chassis with the electronics can be quickly installed with two bolts.
The MS-9600UDLS(E) includes a factory-installed DACT-UD2
Digital Alarm Communicator Transmitter. The DACT transmits
system status (alarm, troubles, AC loss, etc.) to a Central Station via internet (optional IPDACT installed) or the public
switched telephone network.
Optional modules, which plug into the main circuit board, are
available for special functions. Available accessories include
LED, graphic and LCD annunciators, reverse polarity/city box
transmitter, digital alarm communicator/transmitter, SLC
expansion module, local and remote upload/download software and remote power expansion.
FM APPROVED to UL ANSI 864

The GST 200-2 single loop and two loop addressable fire detection control panel with upto 242 devices per loop, the system is packed with features that are not usually associated with smaller and medium systems.
The GST 200-2 provides a high quality solution at exceptional value.
By utilizing advanced GST Protocol, the system is compatible with
the complete range of GST intelligent Detectors, Sounders, Call
Points, Interfaces, including gas extinguishing controls. Networkable with all GST intelligent fire control panels the system can be expanded up to a maximum of 240 GST panels (over 48,000 devices)
The GST 200-2 is manufactured and certified to EN54 parts 2 and 4 and to BS5839 Part 4.
By utilizing the GSTDef2.1 programming facilities enables advanced and complex cause and effects to be programmed with ease,including phased and cascade evacuation scenarios. The GST zonal indication and control facility allows the operator to manually intervene, with evacuation and control of each zone, including control of all plant equipment under an alarm condition.
Maintenance report of dirty detector, pre-alarm signal and are built in as standard, making the system ideal for many applications such as banks, shops, telecommunication centers and GSM exchanges,industrial and commercial facilities.

GST Voice Evacuation System (GST-VES) :
8 Zone Fire Telephone Control Panel, Wall Mounted, Networkable Up to 8 Panels, Fully Monitored, 24VDC Powered is used to make emergency voice announcements to people inside a building. The
system operates when a fire condition is detected, telling people to evacuate from the building. The GST-VES equipment
meets National Fire Protection Association (NFPA) standard and is UL listed. Accomplished with a microphone, amplifier, and
speakers, the building manager or fire department keys the microphone and broadcasts instructions in emergency condition.
The GST-VES system consist one GST-MP panel and several GST-DP panels. The GST-MP Master Panel operates in conjunction
with the Fire Alarm Control Panel (FACP) in a building to provide an automatic response to life safety emergencies.
The GST-MP includes all the necessary features to provide an effective voice evacuation system.
The GST-MP can be custom configured to satisfy the needs of any high rise application. The GST-MP system includes capacity
for 6 channels of simultaneous audio. This provides for evacuation, alert stay-in-place, or other public address announcements
and automatic messages.
GST-DP Distributed Panel is connected to GST-MP in a voice evacuation system, receiving the command and voice signal from
GST-MP, amplifying, and to provide 25V or 70V audio source to the speaker directly. GST-DP may be located either in the fire
alarm control room or distributed on the floors in the building where is closer to the speakers.

LH1-CC15-IN 15W Horn ABS Circular

• Excellent speech reproduction 
• Water-and dust protected to IP 65 
• Easy to install 
• Simple power tapping through color code

Features
Electronically addressed. The address can be modified in field.
Alarm by pressing, reset by a special key.
Plug-in structure.
Standard: EN 54-11.