Addressable Fire Alarm Systems

Product Details:

Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact,
cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features. The
combination of Fire•Lite’s newer series devices and legacy
300 Series devices, along with the MS-9600LS(E) or
MS-9600UDLSE FACP, offer the latest in fire protection technology. LiteSpeed™ is a patented technology that polls 10
devices at a time looking for new or different information.
When new information is found at a specific address, the system polls that device several times for any new data. This
improvement allows a fully loaded panel with up to 636
devices to report an incident and activate the notification circuits in under 10 seconds. With this new polling scheme,
devices can be wired on standard twisted, unshielded wire up
to a distance of 10,000 feet per loop. Each Signaling Line Circuit (SLC) loop supports up to 159 addressable detectors
including photoelectric, photoelectric with heat, beam, ionization, photoelectric duct, fixed heat, fixed heat with rate-of-rise,
and fixed high-heat detectors. It also supports up to 159
addressable modules including monitor (two-wire detector,
normally open devices), dual-monitor functions (two monitor
circuits from one module, two addresses used), multimonitor
(multiple monitor circuits from one module, multiple addresses
used), control (for Notification Appliance Circuits), and relay
(two Form-C) modules.
The FLPS-7 power supply is a separate board while all other
electronics are contained on a single main circuit board. Both
boards are mounted to a quick-removable chassis and housed
in a metal cabinet. The backbox can be installed allowing field
wiring to be pulled. When construction is completed, the chassis with the electronics can be quickly installed with two bolts.
The MS-9600UDLS(E) includes a factory-installed DACT-UD2
Digital Alarm Communicator Transmitter. The DACT transmits
system status (alarm, troubles, AC loss, etc.) to a Central Station via internet (optional IPDACT installed) or the public
switched telephone network.
Optional modules, which plug into the main circuit board, are
available for special functions. Available accessories include
LED, graphic and LCD annunciators, reverse polarity/city box
transmitter, digital alarm communicator/transmitter, SLC
expansion module, local and remote upload/download software and remote power expansion.
FM APPROVED to UL ANSI 864

Additional Information:

• Item Code: MS9600LS
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: One week
• Packaging Details: Wooden Packing

Product Details:

The GST 200-2 single loop and two loop addressable fire detection control panel with upto 242 devices per loop, the system is packed with features that are not usually associated with smaller and medium systems.
The GST 200-2 provides a high quality solution at exceptional value.
By utilizing advanced GST Protocol, the system is compatible with
the complete range of GST intelligent Detectors, Sounders, Call
Points, Interfaces, including gas extinguishing controls. Networkable with all GST intelligent fire control panels the system can be expanded up to a maximum of 240 GST panels (over 48,000 devices)
The GST 200-2 is manufactured and certified to EN54 parts 2 and 4 and to BS5839 Part 4.
By utilizing the GSTDef2.1 programming facilities enables advanced and complex cause and effects to be programmed with ease,including phased and cascade evacuation scenarios. The GST zonal indication and control facility allows the operator to manually intervene, with evacuation and control of each zone, including control of all plant equipment under an alarm condition.
Maintenance report of dirty detector, pre-alarm signal and are built in as standard, making the system ideal for many applications such as banks, shops, telecommunication centers and GSM exchanges,industrial and commercial facilities.

Additional Information:

• Item Code: GST200N
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

I-9102 Intelligent Photoelectric Smoke Detector is an
addressable fire alarm device cooperating with GST intelligent fire alarm control panels to build a fire detection system.
It shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected. The detector receives very
weak infrared light under normal smokeless condition.
If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will alarm out.
In order to reduce interference and power consumption,the emitting circuit works in pulse mode to prolong the life of IR LED.

Additional Information:

• Item Code: I9102
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

Features

¿¿¿ Twin LED for 360°view.
¿¿¿ Electronically addressed in the field.
¿¿¿ Built-in microprocessor stores 14 history data.
¿¿¿ The rate of rising and fixed temperature alarm modes.
¿¿¿ Self-diagnostic.
¿¿¿ Remote indicator output available.
¿¿¿ Complies with EN 54-5 standard.

Additional Information:

• Item Code: I9103
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 1000
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

Features
Electronically addressed. The address can be modified in field.
Alarm by pressing, reset by a special key.
Plug-in structure.
Standard: EN 54-11.

Additional Information:

• Item Code: DI9204E
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment.
The detector automatically carries out system adjustment,
compensation and variation of ambient data.
Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation.
The sensor and the panels utilized fuzzy logic providing an
almost limitless cause and effect scenarios The detector is ideally suited to historical buildings, warehouses, large storages,
shopping malls, leisure centres, exhibition halls, hotel lobbies, printing houses, clothing factories, museums and prisons, as
well as places where slight smoke particles or corrosive gas exist

Additional Information:

• Item Code: I9105R
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

Features

Providing 16 tones.
Using ultra-bright LEDs as a source for light indication. Optional transparent colorless lens (C-94WL) available.
Loop powered or external 24V powered.
Power-saving consumption mode and normal consumption mode (factory default).
Single/dual address programmable.
Working modes: sounder & strobe/strobe only /sounder only.
Standard: EN 54-3

Additional Information:

• Item Code: I9403
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: one week
• Packaging Details: Carton Boxes

Product Details:

Features
Strong environmental adaptability due to drift compensation.
Self-diagnostic.
Reed switch testing.
Removable innovative sensing chamber, easy for maintenance.
Dirty chamber checking.
Fire LED allows 360° viewing
Remote indicator output available.
Polling LED can be set to close.
2 levels smoke sensitivities programmable, level 1 complies with EN 54-7. Heat part complies with EN 54-5.

Additional Information:

• Item Code: DI_9101E
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: One week
• Packaging Details: Carton Boxes

Product Details:

Intelligent Ultraviolet Flame Detector detects fire by analyzing ultraviolet radiation of material flaming. It's applicable to places where open fire, fire with intense flame radiation and fire without
smoldering stage take place easily, as well as places where quick response to a fire is required. Used together with other detectors, it can sense fire in time to minimize losses as much as possible.

Additional Information:

• Item Code: I_9104
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: One Week
• Packaging Details: Carton Boxes

Product Details:

GST Voice Evacuation System (GST-VES) :
8 Zone Fire Telephone Control Panel, Wall Mounted, Networkable Up to 8 Panels, Fully Monitored, 24VDC Powered is used to make emergency voice announcements to people inside a building. The
system operates when a fire condition is detected, telling people to evacuate from the building. The GST-VES equipment
meets National Fire Protection Association (NFPA) standard and is UL listed. Accomplished with a microphone, amplifier, and
speakers, the building manager or fire department keys the microphone and broadcasts instructions in emergency condition.
The GST-VES system consist one GST-MP panel and several GST-DP panels. The GST-MP Master Panel operates in conjunction
with the Fire Alarm Control Panel (FACP) in a building to provide an automatic response to life safety emergencies.
The GST-MP includes all the necessary features to provide an effective voice evacuation system.
The GST-MP can be custom configured to satisfy the needs of any high rise application. The GST-MP system includes capacity
for 6 channels of simultaneous audio. This provides for evacuation, alert stay-in-place, or other public address announcements
and automatic messages.
GST-DP Distributed Panel is connected to GST-MP in a voice evacuation system, receiving the command and voice signal from
GST-MP, amplifying, and to provide 25V or 70V audio source to the speaker directly. GST-DP may be located either in the fire
alarm control room or distributed on the floors in the building where is closer to the speakers.

Additional Information:

• Item Code: GST_VES
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: One week
• Packaging Details: Carton Boxes

Product Details:

I-9602LW Addressable Gas Detector is used to detect leakage of home use combustible gas (LPG, Natural Gas ) in such areas
as houses, hotels and apartments. When leakage is detected, the detector will generate high buzzer alert sound, and provide a
dry contact to turn exhaust fan, a 12VDC source to switch off the gas valve.
The addressable detector can be linked into GST fire alarm system to carry out intelligent control.

Additional Information:

• Item Code: I_9602LW_LPG
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: COIMBATORE
• Production Capacity: 100
• Delivery Time: One week
• Packaging Details: Carton Boxes

Product Details:

DS-9632/64 NI-XT

Third-party network cameras supported
• Up to 12 Megapixels resolution recording
• Support 2-ch HDMI, 2-ch VGA, HMDI1 at up to 4K(3840x2160)

resolution
• Up to 64 IP cameras can be connected with 320M

incoming bandwidth
• Up to 8 SATA interfaces
• Support HDD hot swap with RAID0,1,5,6,10 storage
scheme configurable

•Support various VCA detection alarm and VCA search

•Support H.265/H.264/MPEG4 video formats

Additional Information:

• Item Code: DS963264NIXT
• Delivery Time: 2 OR 3 DAYS
• Packaging Details: CARTON BOXES

Product Details:

• Product Dimensions 4.7 x 5.7 x 5.7 inches
• Item Weight 13.6 ounces
• Item model number SCD-6023R